1:4 DVI Splitter
1x DVI input, 4x DVI outputs.
Gefen's 1:4 DVI Splitter is a stackable distribution hub that sends the same DVI graphics source to up to four DVI digital displays (flat panels or projectors). It is a reliable solution that accommodates four digital video displays at the same time, creating a multi-viewing environment that maintains the highest resolution video at all times.
H
ow it works
The DVI Splitter is connected with a DVI (male to male) cable from the DVI graphic source to the DVI Splitter input. There are four DVI outputs. DVI output one is the primary connection and is used for the main display. DVI outputs two through four follow the main display.
Note: The DVI displays attached to the Splitter must be able to run at the same native resolution.
The DVI Splitter will only output a DVI-D (DVI digital) signal. If you're using a DVI-I cable, it will ONLY pass the digital signal. Using a DVI-I to VGA adapter off of any output will not pass an analog signal. A DVI-D to VGA Conversion Box is required to convert to an analog signal.
DVI, HDCP & HDMI Defined
Package Includes:
* the DVI splitter
* 6ft DVI cable M-M
* 5v Power Supply
Features:
* Connects computers with DVI graphics to four DVI compatible monitors or projectors
* Allows simultaneous display of one source
* Maintains highest DVI single link 1920 x 1200 video resolution
* Built-in DVI Detective for storage of EDID data
* Supports DDWG standard for DVI monitors
Specifications:
* Video Amplifier Bandwidth: 165 MHz
* Input Video Signal: 1.2 volts p-p
* Input DDC Signal: 5 volts p-p (TTL)
* Single Link Range:1080p/1920 x 1200
* DVI Connector: DVI-I 29 pin female (digital only)
* Remote Connector: RJ-11
* Power Supply: 5V DC
* Power Consumption: 10 watts (max)
* Dimensions: 4.5"W x 4"H x 5.2"D
* Shipping Weight: 5 lbs. |
